Cassette Awnings KGM 5 / KGM 6

A cassette awning makes a perfect sun shade for balconies and seating areas. The cassette provides optimum protection for the awning against the weather when it is retracted. A brush removes any leaves and surface dirt as the fabric is retracted.

What makes Cassette Awnings KGM 5 /KGM 6 from Schenker Storen unique

  • Flexible use for single-family homes and apartment buildings
  • Up to 5 or even 6 m wide
  • Up to 2.5 or 4 m overhang
  • The cassette and all the profiles are made from extruded powder-coated aluminium
  • The fabric is optimally protected against the effects of the weather in a compact cassette

Construction highlights

  • Good fabric tension through hinged arms with tension springs
  • Canopy with integrated brush
  • Flexible inclination from 0° to 60° for installation on wall, and from 0° to 90° for ceiling mounting
  • Available with a manual or motor drive

Options

  • Wireless radio controller
  • Electronic sun and wind activated control system
  • Integrated LED lighting

Selection tool for sun blinds / awnings

1:1 Drawings of cassette awning KGM 5

5455
DWG DXF PDF
5456
DWG DXF PDF
5463
DWG DXF PDF

1:1 Drawings of cassette awning KGM 6

5450
DWG DXF PDF
5451
DWG DXF PDF
5452
DWG DXF PDF
5453
DWG DXF PDF

Tender text for cassette awnings KGM 5 / KGM 6

Cassette awnings KGM 5 / KGM 6

Shading system with a box that encases and protects the awning and hinged arms from the effects of the weather. Particularly suitable for balconies in single-family homes and apartment buildings. It can be installed on walls or ceilings.

Consisting of:

Hinged arms
2 hinged arms made from extruded aluminium tubing, joints and connectors made from cast aluminium, hinge bolts made from corrosion-resistant steel. Tension springs inside, with corrosion-resistant steel cables. Hinged arms exposed from under the fabric.
Angle of drop when installed on the wall: 0 - 60 degrees
Angle of drop when installed on the ceiling: 0 - 90 degrees

Side consoles
Made from cast aluminium, acting as combined bearings for securing the hinged arms, roller bearing and box.

Fabric roller
Made from galvanised steel with a weatherstrip groove. Roller studs made from UV resistant plastic with steel studs for bearings and gears.

Box
Made from extruded aluminium, two-piece C-shaped box to protect the fabric roller.
Dimensions of the box (height x depth):

KGM 5    136 mm x 200 mm
KGM 6     151 mm x 225 mm

Fabric rod
An aesthetically pleasing geometric design made from extruded aluminium and a perfect fit for the box profile. With weatherstrip groove to secure the fabric. End caps made from UV-resistant plastic.

Surface treatment
All aluminium parts are powder-coated. Colours from the Schenker range of colours.

Installation
On concrete using special dowels.

Fabric
Of your choice from our Schenker collection.

Drive
Enclosed bevel gear drive with integrated brake, without end limits. Gears always aluminium colour, not painted, with detachable crank rod made from galvanised steel.

Tubular motor, 230V/50Hz with built-in limit switches and thermal protection, including 1m cable.
The blind motors must not be connected in parallel.

The electrical connections must be set up by the customer.

We provide no guarantee for any damage and subsequent damage to blind systems caused by controllers supplied by the customer!

Neue Suche