Convex Venetian Blinds KR 60 / KR 80

Convex venetian blinds lend a classic and elegant look. Their construction guarantees decades of nearly maintenance-free use. With its low recess depths and narrow slats, Convex Venetian Blind KR 60 is ideally suited for renovations.

What makes Convex Venetian Blinds KR 60 / KR 80 from Schenker Storen unique

  • Classic blind with light regulation adapted to the weather conditions
  • Wide range of applications in administrative buildings, schools, hospitals, single-family homes and apartment buildings
  • Thanks to low recess depths, the convex venetian blinds are also ideal for renovations
  • Slat inclination infinitely adjustable
  • Low-noise and easy operation

Construction highlights

  • Stable, convex slats flanged on both sides
  • Guides with damping profile, UV-stabilised guide bolts
  • Movable and extendable end rail bolts, which prevent jamming
  • Mounting strap made from dirt-repellent, age-resistant polyester
  • Available with a manual or motor drive

Options

  • Slats can also be supplied perforated (hole proportion 5%, hole size 0.8 mm) or with light optimisation (LO)
  • Convex venetian blind and insect screen combined with space saving combined guide
  • Also available with an aesthetic cord guide
  • Wireless radio controller
  • Electronic sun and wind activated control system
  • Service and maintenance-friendly design

1:1 Drawings of convex venetian blind KR 60

5000
5000
DWG DXF PDF
5001
5001
DWG DXF PDF
5002
5002
DWG DXF PDF
5003
5003
DWG DXF PDF
5004
5004
DWG DXF PDF
5005
5005
DWG DXF PDF
5140
5140
DWG DXF PDF
5141
5141
DWG DXF PDF
5142
5142
DWG DXF PDF
5143
5143
DWG DXF PDF
5144
5144
DWG DXF PDF
5145
5145
DWG DXF PDF
5146
5146
DWG DXF PDF
5147
5147
DWG DXF PDF
5148
5148
DWG DXF PDF

Tender text for convex venetian blind KR 60

Convex venetian blind KR 60

Convex venetian blind with flanged slats, 59 mm wide. Can be used as sun and weather-protection.
Individually adjustable slat inclination.

Consisting of:

Supporting frame
Made from galvanised steel sheet, closed at the top. Rockers, weatherstrip groove and limit for upper and lower stops installed for manual operation.

Slats
Made from powder-coated aluminium, with plastic guide bolts mounted on alternate sides.
Basic model (Type G). Lowered in the closed, and raised in the horizontal slat position.
Slat colours from the Schenker colour range.

Mounting strap
Made from Terylene, with direct connection to slats through non-rusting clamp.

Lifting cord
Made from grey Terylene fibre with special finish resistant to abrasion, UV radiation, etc. (Xeno test).

Drop closure
Made from extruded aluminium profile, clear anodised, guided by bolts on both sides, rocker bar with the complete drop.

Guides
Lateral guides made from extruded aluminium profiles, clear anodised, with noise-suppressing plastic inserts or lateral steel cord guides, diameter 2.5 mm, with plastic sheathing and spring preloading (when larger than 3 m, the cords are in the drop area).

Drive
Manual operation using a maintenance-free, dust-protected gears with integrated brake, extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

The electrical connections must be set up by the customer.

We provide no guarantee for any damage and subsequent damage to blind systems caused by controllers supplied by the customer!

1:1 Drawings of convex venetian blind KR 80

5050
5050
DWG DXF PDF
5051
5051
DWG DXF PDF
5052
5052
DWG DXF PDF
5053
5053
DWG DXF PDF
5054
5054
DWG DXF PDF
5055
5055
DWG DXF PDF
5056
5056
DWG DXF PDF
5057
5057
DWG DXF PDF
5058
5058
DWG DXF PDF
5059
5059
DWG DXF PDF
5140
5140
DWG DXF PDF
5141
5141
DWG DXF PDF
5142
5142
DWG DXF PDF
5143
5143
DWG DXF PDF
5144
5144
DWG DXF PDF
5145
5145
DWG DXF PDF
5146
5146
DWG DXF PDF
5147
5147
DWG DXF PDF
5148
5148
DWG DXF PDF
5149
5149
DWG DXF PDF
5150
5150
DWG DXF PDF
5151
5151
DWG DXF PDF
5152
5152
DWG DXF PDF

Tender text for convex venetian blind KR 80

Convex venetian blind KR 80

Convex venetian blind with flanged slats, 80 mm wide. Can be used as sun and weather-protection.
Individually adjustable slat inclination.

Consisting of:

Supporting frame
Made from galvanised steel sheet, closed at the top. Rockers, weatherstrip groove and limit for upper and lower stops installed for manual operation.

Slats
Made from powder-coated aluminium, with plastic guide bolts mounted on alternate sides.
Basic model (Type G). Lowered in the closed, and raised in the horizontal slat position.
Slat colours from the Schenker colour range.

Mounting strap
Made from Terylene, with direct connection to slats through non-rusting clamp.

Lifting cord
Made from grey Terylene fibre with special finish resistant to abrasion, UV radiation, etc. (Xeno test).

Drop closure
Made from extruded aluminium profile, clear anodised, guided by bolts on both sides, rocker bar with the complete drop.

Guides
Lateral guides made from extruded aluminium profiles, clear anodised, with noise-suppressing plastic inserts or lateral steel cord guides, diameter 2.5 mm, with plastic sheathing and spring preloading (when larger than 3 m, the cords are in the drop area).

Drive
Manual operation using a maintenance-free, dust-protected gears with integrated brake, extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

The electrical connections must be set up by the customer.

We provide no guarantee for any damage and subsequent damage to blind systems caused by controllers supplied by the customer!