Extendable Blinds AS 95 / AS 150 / ASR 95

With their modular design, Extendable Blinds AS 95 / AS 150 / ASR 95 can be adapted to very different building situations. The fabric blinds are used in residential and commercial buildings, as well as for new buildings and renovations. The modular design means that retrofitting is also possible at any time. The extendable blinds can be further lowered vertically for an even better shading after they have been extended.

What makes Extendable Blinds AS 95 / AS 150 / ASR 95 from Schenker Storen unique

  • More light and good air circulation in the room for a pleasant, natural indoor environment
  • Robust and high quality
  • Suited for renovations and new buildings
  • The pivot point of the retractable arm is freely adjustable

Construction highlights

  • Profile guide
  • Metal components made from aluminium, colourless anodised or, on request, with a coloured powder coating
  • ASR 95: Rod guides and extending mechanism made from robust, non-rusting stainless steel
  • Diameter of rollers
    AS 95 / AS150: 63 mm or 78 mm
    ASR 95: 52 mm
  • The roller bearings are fixed to the profile guides, and not to the building
  • Available with a manual or motorised drive

Options

  • Wireless radio controller

Selection tool for fabric blinds / drop-arm awnings

1:1 Drawings of Extendable blinds AS 95

5304
5304
DWG DXF PDF
5307
5307
DWG DXF PDF
5308
5308
DWG DXF PDF
5335
5335
DWG DXF PDF
5336
5336
DWG DXF PDF
5337
5337
DWG DXF PDF

Tender text Extendable blinds AS 95

Extendable blinds AS 95

Externally mounted shading system with additional lowering possibility, vertical until completely down (sight protection) once the extension procedure has been completed.

Consisting of:

Guides
Profile guides made from extruded aluminium.

Side console
Made from galvanised steel plate, fully mounted on guides.

Fabric roller
Made from aluminium, with weatherstrip groove for attaching the fabric.

Extension mechanism
Made from aluminium, length 500 mm.

Fabric rod and cross bar
Fabric rod made from aluminium profile, with weatherstrip. Optimal extension procedure thanks to the fabric rod being weighted with sand. End caps made from die-cast zinc. Cross bar made from aluminium tube. End caps made from UV-resistant plastic.

Surface treatment
All aluminium parts are clear anodised.

Fabric
Choice from our Schenker Storen Collection.

Drive
Manual drive using maintenance-free gears with integrated brake, which are protected from dust. Operation using extendable PVC-coated articulated crank. Pre-hung constructions are only equipped with motor drives.

Tubular motor 230V/50Hz, with integrated limit switches and thermal protection, including a 1 m connecting cable.
Blind motors may not be connected in parallel.

The electrical connections must be set up by the customer.

 We provide no guarantee for any damage and subsequent damage to blind systems caused by controllers supplied by the customer!

1:1 Drawings of Extendable blinds AS 150

5300
5300
DWG DXF PDF
5301
5301
DWG PDF
5302
5302
DWG DXF PDF
5303
5303
DWG DXF PDF
5304
5304
DWG DXF PDF
5305
5305
DWG DXF PDF
5306
5306
DWG DXF PDF
5307
5307
DWG DXF PDF
5308
5308
DWG DXF PDF

Tender text for Extendable blinds AS 150

Extendable blinds AS 150

Externally mounted shading system with additional lowering possibility, vertical until completely down (sight protection) once the extension procedure has been completed.

Consisting of:

Guides
Profile guides made from extruded aluminium.

Side consoles
Made from galvanised steel plate, fully mounted on guides.

Fabric roller
Made from aluminium, with weatherstrip groove for attaching the fabric.

Extension mechanism
Made from aluminium, length 500 mm.

Fabric rod and cross bar
Fabric rod made from aluminium profile, with weatherstrip. Optimal extension procedure thanks to the fabric rod being weighted with sand. End caps made from die-cast zinc. Cross bar made from aluminium tube. End caps made from UV-resistant plastic.

Surface treatment
All aluminium parts are clear anodised.

Fabric
Choice from our Schenker Storen Collection.

Drive
Manual drive using maintenance-free gears with integrated brake, which are protected from dust. Operation using extendable PVC-coated articulated crank. Pre-hung constructions are only equipped with motor drives.

Tubular motor 230V/50Hz, with integrated limit switches and thermal protection, including a 1 m connecting cable.
Blind motors may not be connected in parallel.

The electrical connections must be set up by the customer.

We provide no guarantee for any damage and subsequent damage to blind systems caused by controllers supplied by the customer!

1:1 Drawings of Extendable blinds rust-free ASR 95

5320
5320
DWG DXF PDF
5321
5321
DWG DXF PDF
5322
5322
DWG DXF PDF
5323
5323
DWG DXF PDF
5324
5324
DWG DXF PDF
5325
5325
DWG DXF PDF

Tender text for Extendable blinds rust-free ASR 95

Extendable blinds rust-free ASR 95

Externally mounted shading system with extension mechanism and guides made from stainless steel.

Consisting of:

Guides
Round pole guidance made from cold drawn stainless-steel 1.4301

Side consoles
Made from galvanised steel plate with mounting bracket for installation on wall or ceiling mounting.

Fabric roller
Made from aluminium, with weatherstrip groove for attaching the fabric.

Extension mechanism
Made from stainless steel 1.4301. Arm length: 400, 500, 700 and 1000 mm.

Fabric rod and cross bar
Fabric rod made from aluminium profile, with weatherstrip. Optimal extension procedure thanks to the fabric rod being weighted with sand. End caps made from die-cast zinc. Cross bar made from aluminium tube. End caps made from UV-resistant plastic.

Surface treatment
All aluminium parts are clear anodised.

Fabric
Choice from our Schenker Storen Collection.

Drive
Manual drive using maintenance-free gears with integrated brake, which are protected from dust. Operation using extendable PVC-coated articulated crank. Pre-hung constructions are only equipped with motor drives.

Tubular motor 230V/50Hz, with integrated limit switches and thermal protection, including a 1 m connecting cable.
Blind motors may not be connected in parallel.

The electrical connections must be set up by the customer.

We provide no guarantee for any damage and subsequent damage to blind systems caused by controllers supplied by the customer!